pico

PICOSECOND LASER

High Power Micromachining

 

An innovative laser optics design, combined with an industrial-grade power supply, results in an extraordinarily reliable and rugged diode-pumped Nd:YAG laser for industrial or scientific use.

 

Efficient seed/diode pumped solid-state amplifier (patented)
“CE Mark” Certified; this is a CDRH Class IV laser product

Q-switched performance

Wavelength (nm)10641064532532
Max Output Power before POD (W)*1550930
Max Output Power after POD (W)*1240724
Max Pulse Energy before POD (mJ)*12040060200
Pulse Width FWHM (ps) Nominal*15151515
Min. Pulse Repetition Rate (kHz)*0, Single Pulse0, Single Pulse0, Single Pulse0, Single Pulse
Max. Pulse Repetition Rate (MHz)*30303030
Single Pulse Selection (MHz)*Up to 4Up to 4Up to 4Up to 4
Pulse Peak Power (MW)*8253.513
* Actual results are configuration dependant

Operational

Wavelength1064nm532nm
M2 Value< 1.4< 1.4
Beam Diameter, nominal2.0mm2.0mm
Beam Divergence (full angle), nominal< 1.0mr< 0.5mr
PolarizationLinearLinear
* Actual results are configuration dependant

Mechanical & Electrical

WarningLabel
Output Module Dimensions198 H X 371 W X 985 L mm
Recommended Service220 +/- 10% VAC, 1-phase, 50/60 Hz, 30A
Max Power Consumption2.02 kW
Weight, Output Module60 kg
Weight, Power Supply230 kg
CoolingCity water cooled, 8 I/m @ 15 C max temp. Self-contained, refrigerated chiller 1-kW heat vented into room
Temperature Operating18 - 33 C
Humidity10 - 90%, non-condensing
OptionsPower/cooling supply as 19" rack mount for integration
* Actual dimensions and water service are configuration dependent.

Data Sheets

 

LFP-50T

 

Note: Lee Laser follows a policy of continuous improvement.  Specifications and dimensions are subject to change without notice.

Operational

WarningLabel