Green1_no background

TEMoo Mode / 532 nm Wavelength

An innovative laser optics design, combined with an industrial-grade power supply, results in an extraordinarily reliable and rugged diode-pumped Nd:YAG laser for industrial or scientific use.


Efficient diode optical pumping for improved performance and reliability
High power visible output from small diameter, low divergence beam
Highly circular TEMoo-mode beam profile
Q-switched pulse stability:  1 % rms up to 30 kHz
Efficient water/water heat exchange cooling system (water-cooled, refrigerated-chiller cooling system optionally available)
 ● Uses Intracavity SHG Assembly with LBO harmonic generator crystal
“CE Mark” Certified; this is a CDRH Class IV laser product

Q-switched performance

Frequency (kHz)*510*20
Average Power (W)*1012*10
Pulse Energy (mJ)*2.01.2*0.5
Pulse Width (ns) Nominal*90100*150
Pulse Width Power (kW)*2212*3.3
* Actual results are configuration dependant


Tansverse ModeTEMoo
Beam Diameter, nominal.8 mm
Beam Divergence, nominal1.5 mr
* Actual results are configuration dependant

Mechanical & Electrical

Optical Rail Length21 H X 22.9 W X 127 L cm
Power Station Dimensions83 H X 60 W X 85 D cm (Water / Water cooler)
Recommended Service220 +/- 10% VAC, 1-phase, 50/60 Hz, 20A
Average Consumption2 kW, maximum with water / water cooler
Cooling - WaterCity water, 16 1/m @ 15 C max. temp.
Optional city-water cooled refrigerated chiller
requires city water, 8 1/m @ 25 C max. temp
Temperature Operating18 - 30 C
Humidity10 - 90%, non-condensing
* Actual dimensions and water service are configuration dependent.

Data Sheets



Note: Lee Laser follows a policy of continuous improvement.  Specifications and dimensions are subject to change without notice.