Green1_no background

Multimode / 532 nm Wavelength

An innovative laser optics design, combined with an industrial-grade power supply, results in an extraordinarily reliable and rugged diode-pumped Nd:YAG laser for industrial or scientific use.


Efficient diode optical pumping for improved performance and reliability
High power visible output from small diameter, low divergence beam
Q-switched pulse stability:  1 % rms up to 30 kHz
Jitter: ± 2.5 ns, measured at 10 kHz full diode current
Efficient water/water heat exchange cooling system (water-cooled, refrigerated-chiller
cooling system optionally available)
Uses Intracavity SHG Assembly with LBO harmonic generator crystal
“CE Mark” Certified; this is a CDRH Class IV laser product

Q-switched performance

Frequency (kHz)*510*20
Average Power (W)*4050*48
Pulse Energy (mJ)*8.05.0*2.4
Pulse Width (ns) Nominal*150200*325
Pulse Width Power (kW)*53.325*7.4
* Actual results are configuration dependant


Tansverse ModeMultimode
Beam Diameter, nominal< 2.0mm
Beam Divergence, nominal4mr
* Actual results are configuration dependant

Mechanical & Electrical

Optical Rail Length21 H X 22.9 W X 127 L cm
Power Station Dimensions77 H X 60 W X 85 D cm (Water / Water cooler)
Recommended Service220 +/- 10% VAC, 1-phase, 50/60 Hz, 30A
Average Consumption2 kW, maximum with water / water cooler
Cooling - WaterCity water, 16 l/m @ 15° C max. temp.
Optional city-water cooled refrigerated chiller
requires city water, 8 1/m @ 25 C max. temp
Temperature Operating18 – 30° C
Humidity10 - 90%, non-condensing
* Actual dimensions and water service are configuration dependent.

Data Sheets


LDP-100MQG 10kHz

Note: Lee Laser follows a policy of continuous improvement.  Specifications and dimensions are subject to change without notice.